Modul Autocad 2007 3d Untuk Teknik Mesin

Sponsored link: Download Modul Autocad 2007 3d Untuk Teknik Mesin
On this page you can read or download Modul Autocad 2007 3d Untuk Teknik Mesin in PDF format. We also recommend you to learn related results, that can be interesting for you. If you didn't find any matches, try to search the book, using another keywords.
C:!!autocad Modules!!!autocad 3d25modulepdfautocad 3d Module
c:!!autocad modules!!!autocad 3d25modulepdfautocad 3d module
.After an object is constructed as a solid 3D model there are AutoCAD commands and features available to create and dimension a. go any farther in this module, you must know and understand the following concepts:Creating and modifying AutoCAD layout drawings.Working in. listed above are covered in the AutoCAD 2D Modules 39 and 40. If necessary, go back and reread or redo those two modules.

Language: english
PDF pages: 12, PDF size: 0.27 MB
3d Tutorials Autocad 2007
3d tutorials autocad 2007
Language: english
PDF pages: 200, PDF size: 2.36 MB
Autocad 2d\23\module\2013 2007-2013 Pdf
autocad 2d\23\module\2013 2007-2013 pdf
When you are prompted to Select objects, use a window to select the small circle and lines. Enter PO for polar array. Snap to the center of circle B for the center of the array, enter 8 for the total number to array and array it 360 degrees. Set rotate to No and set the base point for the object being arrayed by snapping to the center of the object as shown on the figure. Leave Associative set to No. (Figure Step 8A, 8B, and 8C) Command: ARRAY Select objects: Specify opposite corner: 3 found Select objects.

Language: english
PDF pages: 51, PDF size: 1.25 MB
Autocad 2d\38\module\2013 2007-2013 Pdf\autocad Module
autocad 2d\38\module\2013 2007-2013 pdf\autocad module
Authors Comments: Ensure that you are working in Paper space when inserting dimensions and snap to model space objects when placing the dimension. Do not snap to Paper space objects. Step 6 Enter the DIMLIN command, as shown below, to insert a linear dimension. (Figure Step 6) Command: DIMLIN Specify first extension line origin or : (end) P1 Specify second extension line origin: (end) P2 (Ensure to snap to the ends of the lines.) Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/.

Language: english
PDF pages: 21, PDF size: 0.55 MB
Autocad 2d\15\module\2013 2007-2013 Pdf\autocad Module
autocad 2d\15\module\2013 2007-2013 pdf\autocad module
(Figure Step 11A and 11B) Command: O Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] : 0.25 Select object to offset or [Exit/Undo] : P32 Specify point on side to offset or [Exit/Multiple/Undo] : P33 Select object to offset or [Exit/Undo] : P34 Specify point on side to offset or [Exit/Multiple/Undo] : P33 Select object to offset or [Exit/Undo] : P35 Specify point on side to offset or [Exit/Multiple/Undo] : P33 Select object to offset or [Exit/.

Language: english
PDF pages: 20, PDF size: 0.32 MB
1   2   3   4   5   Next page →
English ▼
Home Copyright Information Privacy Policy DMCA Contact us

PDFSB.NET | All Rights Reserved
This project is a PDF search engine and do not store, hold or retain any files.