Modul Gambar Teknik Mesin Dengan Autocad

Sponsored link: Download Modul Gambar Teknik Mesin Dengan Autocad
On this page you can read or download Modul Gambar Teknik Mesin Dengan Autocad in PDF format. We also recommend you to learn related results, that can be interesting for you. If you didn't find any matches, try to search the book, using another keywords.
Autocad 2d\38\module\2013 2007-2013 Pdf\autocad Module
autocad 2d\38\module\2013 2007-2013 pdf\autocad module
Authors Comments: Ensure that you are working in Paper space when inserting dimensions and snap to model space objects when placing the dimension. Do not snap to Paper space objects. Step 6 Enter the DIMLIN command, as shown below, to insert a linear dimension. (Figure Step 6) Command: DIMLIN Specify first extension line origin or : (end) P1 Specify second extension line origin: (end) P2 (Ensure to snap to the ends of the lines.) Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/.

Language: english
PDF pages: 21, PDF size: 0.55 MB
Report
Autocad 2d\15\module\2013 2007-2013 Pdf\autocad Module
autocad 2d\15\module\2013 2007-2013 pdf\autocad module
(Figure Step 11A and 11B) Command: O Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] : 0.25 Select object to offset or [Exit/Undo] : P32 Specify point on side to offset or [Exit/Multiple/Undo] : P33 Select object to offset or [Exit/Undo] : P34 Specify point on side to offset or [Exit/Multiple/Undo] : P33 Select object to offset or [Exit/Undo] : P35 Specify point on side to offset or [Exit/Multiple/Undo] : P33 Select object to offset or [Exit/.

Language: english
PDF pages: 20, PDF size: 0.32 MB
Report
Modul D Ariosuko Dh. Teknik Mesin Universitas Mercu
modul d ariosuko dh. teknik mesin universitas mercu
(or type in 3,5 in command box) Click or type for the 2nd point (1,10) Next point: 6,10  8,7  11,7  11,3 Type in C {enter} for close. Note: You should be aware that  Drawing Circle 1 there are several methods in 1) Type in at command prompt box: producing the same output. CIRCLE Specify center point : 3,5 In general, to execute any Specify radius of circle or [Diameter]: 1 command, you could either use the menu on the top, or  Drawing Circle 2 use the icon or by typing in 1) Click icon Circle command .

Language: english
PDF pages: 17, PDF size: 1.33 MB
Report
Seminar Nasional Tahunan Teknik Mesin (snttm) Ke-9 Palembang, 13
seminar nasional tahunan teknik mesin (snttm) ke-9 palembang, 13
Shear Pin, as it was known, is used for fail safe mechanism of various mechanical systems such as aircraft engine mounting, valve, coupling, gear train, flocculator, guide vane etc. The shear pin should withstand the static as well as dynamic or fatigue loads but it should fail under a certain overload. Depending on the loading speed, it may fail under quasi-static, intermediate strain rate or low velocity/bar impact load. Thus an accurate load determination is very important.The choice of shear pin .

Language: english
PDF pages: 10, PDF size: 0.39 MB
Report
Autocad Modules!! The Cad Guys
autocad modules!! the cad guys
Language: english
PDF pages: 66, PDF size: 4.75 MB
Report
1   2   3   4   5   6   7   8   9   10   Next page →
English ▼
Home Copyright Information Privacy Policy Contact us

PDFSB.NET | All Rights Reserved
This project is a PDF search engine and do not store, hold or retain any files.